Algebra in the City All articles
Civic Algebra

Counting the Square's Christmas Lights Without Climbing a Ladder

Algebra in the City
Counting the Square's Christmas Lights Without Climbing a Ladder

Photo: Gerald England , CC BY-SA 2.0, via Wikimedia Commons

Stand in a UK market square on a dark December evening and the civic Christmas tree does a good impression of a maths diagram. The lights climb in tiers, each ring a little wider or narrower than the last, and the whole thing looks less like decoration than a sequence waiting to be counted.

You do not need to climb a ladder to work out how many bulbs are up there. You need one ring, one multiplier, and the formula for a geometric sequence. That is the same bit of algebra that turns up in savings accounts, phone contracts and, apparently, municipal festive lighting.

Start with one ring and a multiplier

Find the bottom ring of lights and count the bulbs on it. Suppose there are 48. Now look at the next ring up. If it has 96, and the one above that has 192, you have spotted the pattern: each tier carries twice as many bulbs as the one below it.

In algebra, that is a geometric sequence. Call the first term a, the multiplier r, and the number of tiers n. The sequence is:

a, ar, ar^2, ar^3, ...

For our imaginary civic tree, a = 48 and r = 2. With six tiers, the bulbs run: 48, 96, 192, 384, 768, 1536. The tree is not just adding a few bulbs each time. It is multiplying, and multiplication gets expensive quickly.

The total is the number the council actually buys

The sum of a geometric sequence is:

S = a(1 - r^n) / (1 - r)

For r = 2, that simplifies to S = a(2^n - 1). With a = 48 and n = 6, the total is 48 × (64 - 1) = 48 × 63 = 3024 bulbs.

That is the number that matters for the purchase order, the spares box and the poor person who has to check the fuse. It is also the number you can use on your own tree or window display. Count the first layer, estimate the multiplier, count the layers, and you have a decent estimate without unscrewing a single bulb.

If your lights are one long string with no tiers, then r = 1 and the sum is simply a × n. The formula still works; it just stops being dramatic.

What the meter says

Bulb count is only half the story. The electricity cost depends on three more things: the wattage of each bulb, the hours the tree is lit, and the price per kilowatt-hour on the council's tariff.

The cost formula is:

Cost = number of bulbs × watts per bulb ÷ 1000 × hours × price per kWh

Take our 3024 bulbs. Suppose they are LEDs using 0.4 watts each, and the tree is lit for six hours a night for 35 nights. That is 210 hours. The energy use is 3024 × 0.4 ÷ 1000 × 210 = 254 kWh. At an illustrative 24p per kWh, the bill is about £61.

Now run the same tree with old-style 4-watt filament bulbs. The energy use becomes 2540 kWh, and the bill is about £610. Same sequence, same number of bulbs, same six tiers. The only change is the wattage. That is where the LED switch really lands: it is a multiplier on the whole series, not a tweak to the pattern.

If a council swaps 4-watt bulbs for 0.4-watt LEDs, the bill falls by a factor of ten. The geometric sum still describes the tree. The LED swap just makes every term in that sum cheaper to run.

Why one more tier is rarely a small decision

With r = 2, the seventh tier would need 3072 bulbs. That is more than the entire six-tier tree. The total would jump from 3024 to 6096 bulbs, and the electricity bill would double with it.

This is the trap with any geometric pattern. The last tier is often the biggest, and adding one more step can cost more than everything before it. Designers know this. So do councils with fixed festive budgets. The algebra does not tell them what the tree should look like, but it does make the trade-off visible.

Try it on your own display

You can use the same method on a window display, a school hall tree or a string of lights over a shop door. Count the first layer, work out the multiplier between layers, and count how many layers there are. Then use the sum formula. If your display is not perfectly regular, use an average multiplier and treat the answer as an estimate rather than a promise.

For the civic tree in the square, the algebra is a small act of accounting. It turns a twinkling shape into a number of bulbs, a number of kilowatt-hours and a line in a budget. The lights still look like Christmas. But now you can also see the sequence.

All Articles

Related Articles

The Escalator's Two-Speed Budget: Why Walking Left Can Cost the Queue

The Escalator's Two-Speed Budget: Why Walking Left Can Cost the Queue

The Ramp That Wasn't: One Inequality That Audits Your High Street

The Ramp That Wasn't: One Inequality That Audits Your High Street

The Lights Aren't the Whole Story: Rebuilding Your Commute as a Piecewise Graph

The Lights Aren't the Whole Story: Rebuilding Your Commute as a Piecewise Graph